Al Faisal HVAC · Dubai · Wholesale Export
Copper Condenser & Evaporator Coils Kenya —
Replacement Coils from Dubai
Replacement copper condenser and evaporator coils for split AC systems in Kenya — and ACR copper coil for cold room evaporator fabrication. Supplied wholesale from Dubai, shipped to Mombasa in consolidated LCL containers.
Condenser and evaporator coil failures are among the more costly AC repairs in the Kenyan market — the coil assembly is not an inexpensive part, and the labour for replacement is significant. But in Kenya’s environment, coil failures happen for specific and largely preventable reasons: salt air corrosion on Mombasa coastal installations attacking the thin-wall copper fins and tubes, refrigerant leaks developing at hairpin bends from vibration over years of operation, and in some cases coil blockage from accumulated dust on indoor evaporator coils that were never cleaned.
Al Faisal supplies replacement coil assemblies for the split AC models most commonly installed in Kenya, and ACR soft copper coil for Kenyan refrigeration contractors who fabricate custom evaporator coils for cold room applications. For replacement coil orders, the AC outdoor or indoor unit model number is the essential reference — coil dimensions and refrigerant circuit configuration are model-specific.
💡 Before ordering a replacement coil, confirm the fault is actually the coil. A coil with a pinhole leak can sometimes be repaired with silver brazing at the leak point — particularly if the leak is at an accessible fitting or hairpin rather than in the middle of a fin block. A coil replacement is warranted when the leak is inaccessible, when corrosion is widespread across the coil surface, or when the coil is physically damaged. WhatsApp us the AC unit model number and a description of the fault and we advise on whether a coil replacement or a material order for repair is the correct approach.
Condenser Coil Replacement — Outdoor Unit
The condenser coil in the outdoor unit rejects heat from the refrigerant to the outdoor air — it is the component that makes the outdoor unit hot to the touch during operation. Condenser coil failures in Kenya’s market are most commonly caused by salt air corrosion on Mombasa coastal installations, where the fine copper and aluminium fins gradually pit and develop through-wall corrosion over years of salt air exposure. In Nairobi, condenser coil damage more commonly results from physical impact, hailstone damage, or in poorly located outdoor units, forklift or vehicle contact.
Identifying Condenser Coil Failure
A leaking condenser coil presents as progressive refrigerant loss — the system gradually underperforms as charge drops. UV dye leak detection is the most reliable method for locating the leak in a condenser coil. Apply dye, run the system for 30–60 minutes, then inspect the condenser coil with a UV lamp. Pinholes and hairpin cracks concentrate dye visibly. For Mombasa coastal units, inspect the lower section of the condenser coil where airborne salt concentrates as rainwater evaporates — this is where corrosion-induced leaks most commonly begin.
Ordering Replacement Condenser Coils
Condenser coil replacement assemblies are model-specific — the coil dimensions, tube diameter, fin pitch and refrigerant circuit connection points vary by brand and model. Provide the outdoor unit model number when enquiring. We confirm availability for the specific model and advise on lead time. Common models for the brands most widely installed in Kenya — LG, Samsung, Hitachi, Carrier — have better availability than less common models. For older units where the OEM coil is no longer manufactured, a custom fabrication approach using ACR copper tube and aluminium fin stock may be required.
Evaporator Coil Replacement — Indoor Unit
The evaporator coil in the indoor unit absorbs heat from the room air, cooling the space. Indoor evaporator coil failures are less common than outdoor condenser failures in Kenya — the indoor unit is protected from the outdoor environment — but they do occur from refrigerant leaks at hairpin bends in older units, from coil damage during servicing, and from corrosion in coastal buildings where salt-laden air circulates through the indoor unit from the conditioned space.
Identifying Evaporator Coil Failure
An evaporator coil leak presents similarly to a condenser leak — progressive refrigerant loss and reduced cooling. The indoor unit may ice up (frost on the evaporator coil) if the charge drops significantly below specification. UV dye detection applies here too — but evaporator coil access requires removing the indoor unit casing and the filter. A leaking evaporator coil in an older unit is sometimes the trigger for a full system replacement decision, as the cost of coil replacement plus refrigerant recharge approaches new equipment cost for lower-end systems.
Ordering Replacement Evaporator Coils
Indoor unit evaporator coil replacement assemblies are model-specific — provide the indoor unit model number when enquiring. Availability for current and recent models is better than for older discontinued models. For high-value commercial indoor units — Daikin cassettes, Hitachi cassettes, Carrier fan coil units — replacement coil sourcing from Dubai is often the only viable option when local Nairobi supply does not carry the part. Air freight is available for urgent commercial unit coil replacement that cannot wait for sea freight.
Cold Room Evaporator Coil Fabrication in Kenya
Kenya’s growing cold chain sector — floriculture for export, food storage, pharmaceutical refrigeration, hospitality cold rooms — generates consistent demand for fabricated evaporator coils from Kenyan refrigeration contractors who build custom cold room installations. These contractors source ACR soft copper coil from Al Faisal Dubai in the 3/8″, 1/2″ and 5/8″ sizes, wind and braze their own evaporator coil assemblies matched to the room dimensions, and install them into condensing unit systems running on R404A or R134a.
The quality requirements for cold room evaporator coil fabrication are the same as for AC installation — ACR-grade copper only, nitrogen purging during every brazed joint, and proper leak testing with nitrogen pressure before the system is commissioned. A brazed joint on an evaporator coil that was not nitrogen purged will have copper oxide scale internally — that scale breaks off and blocks the expansion valve of the cold room system within months of commissioning.
ACR Soft Copper Coil Kenya — sizes and ordering →
⚠️ Coastal Mombasa coil corrosion — prevention is far cheaper than replacement
Salt air corrosion of outdoor condenser coils in Mombasa’s beach hotel corridor and coastal residential areas is predictable and progressive — not a question of whether it happens, but when. Annual condenser coil cleaning with a non-acidic coil cleaner removes salt deposits before they penetrate the fin surface. Anti-corrosion coil coating — applied after cleaning — significantly extends coil life on coastal installations by forming a barrier between the copper/aluminium surface and the salt-laden air. Kenyan workshops servicing coastal properties that include annual coil cleaning and coating in their maintenance contracts reduce coil replacement frequency substantially and provide a better service to coastal customers than those who clean only when called for a fault.
Ordering Coils from Dubai to Kenya
Replacement coil orders
Provide the indoor or outdoor unit model number from the nameplate. We confirm coil availability and lead time. For urgent commercial repairs, air freight Dubai to Nairobi is available in 48–72 hours.
Cold room fabrication coil
ACR soft copper coil in 3/8″, 1/2″ and 5/8″ sizes for evaporator fabrication. Specify size, coil length and quantity. Ships as general cargo consolidated with the rest of your Kenya order.
Shipping
General cargo — no DG classification. LCL sea freight Jebel Ali to Mombasa, 10–16 days transit. Consolidates with compressors, gas and spare parts in the same container. Full documents for KRA clearance provided.
Lead times
ACR copper coil for fabrication: in stock, ships within 3–5 days of payment. Replacement coil assemblies: depends on model — common brands and current models typically available; older models may require sourcing. We advise on lead time with the availability confirmation.
🌍 Al Faisal — Copper Coils Wholesale Export to Kenya
Replacement coils & fabrication copper — send us the model number
Condenser coils · evaporator coils · ACR fabrication coil — weekly LCL Jebel Ali → Mombasa
Frequently Asked Questions
Can a leaking condenser coil be repaired rather than replaced?
Yes — if the leak is accessible and isolated to a specific point such as a hairpin bend or a fitting connection, silver brazing can seal the leak effectively. The repair procedure requires recovering all refrigerant, locating the leak precisely with UV dye or nitrogen pressure test, brazing the repair with nitrogen purge flowing through the coil during brazing to prevent oxide scale formation, pressure testing with nitrogen to confirm the repair has sealed, then evacuating and recharging correctly. A brazing repair on an accessible leak in an otherwise sound coil is a legitimate repair that avoids the cost and lead time of a replacement coil. A coil with widespread corrosion, multiple leak points, or damage to the fin block that restricts airflow is a candidate for replacement rather than repair.
How long do condenser coils last in Mombasa’s coastal environment?
Without maintenance, outdoor condenser coils in Mombasa’s front-line coastal properties — beach hotels, seafront apartments — can develop significant corrosion within 3–5 years of installation. With regular salt removal cleaning (every 3–6 months) and anti-corrosion coating applied annually, coil life extends to 8–12 years before the corrosion becomes irreparable. The difference is entirely in the maintenance regime. Kenyan HVAC contractors who sell annual maintenance contracts including coil cleaning and coating to Mombasa coastal property managers deliver measurably longer coil and compressor life than those who visit only for fault repairs — and the maintenance contract revenue is more predictable than emergency repair callouts.
Related Pages
- Copper Coils Kenya — ACR soft copper coil for fabrication
- Copper Pipe & Tube Kenya
- Cold Room & Refrigeration Compressors Kenya
- HVAC Tools Kenya — leak detectors, UV lamps, brazing torches
- AC Spare Parts All Brands Kenya
- AC Compressors Wholesale Kenya
- Refrigerant Gas Wholesale Kenya
- AC Spare Parts Wholesale Kenya — full product range hub
- How to Order & Ship from Dubai to Kenya
- About Al Faisal — Dubai HVAC exporter since 2005
Order Copper Condenser & Evaporator Coils for Kenya
Replacement condenser & evaporator coil assemblies for LG, Samsung, Hitachi, Carrier and other brands. ACR soft copper coil for cold room evaporator fabrication — 3/8″, 1/2″ and 5/8″. Send us the AC unit model number and we confirm availability within 24 hours. Sea freight Jebel Ali → Mombasa. Air freight Dubai → Nairobi for urgent commercial coil replacement.
📞 +971 55 874 7919 · ☎ 04 2340 337 · Shop No S03B, Al Wasl Building, Deira – Al Rigga, Dubai · Mon–Sat 8AM–8PM (GMT+4)