Al Faisal A/C Spare Parts Trading LLC · Refrigerant Gas Export to Egypt
R410A Refrigerant Egypt —
Westron® Cylinders & Bulk Supply
from Dubai
Westron® (UAE Origin) · Maxron® (Made in Korea) · Forane® Arkema (France) · ELIWELL · Fastcool
Standard for All New Egyptian Split AC Since 2015 — Sea Freight Jebel Ali to Alexandria & Port Said
R410A has been the standard refrigerant for every new residential and commercial split AC system installed in Egypt since approximately 2015. As Egypt’s enormous pre-2015 R22 fleet gradually ages out and is replaced — and as new construction across Cairo, the New Administrative Capital, Alexandria and the Delta cities continues at pace — the volume of R410A demand in Egypt grows every year.
Unlike R22 which is in a slow decline, or R32 which is still in an early growth phase, R410A sits at the peak of the Egyptian market right now. Every new split AC unit sold through Egypt’s electronics retailers — LG, Samsung, Carrier, Midea, Gree, Haier, Hisense — runs on R410A. Every HVAC contractor doing new installations in Egypt’s commercial buildings is working with R410A. Every spare parts dealer who services the post-2015 installed base needs R410A on their shelf.
Al Faisal A/C Spare Parts Trading LLC supplies R410A wholesale from Dubai — Westron® (UAE origin), Maxron® (Made in Korea), Forane® Arkema (France), ELIWELL and Fastcool — shipped by sea freight from Jebel Ali Port to Alexandria and Port Said weekly.
What Is R410A — Key Facts for Egyptian HVAC Dealers
A1
Safety Classification
Non-toxic and non-flammable. ASHRAE A1 — the safest refrigerant class. No special explosion-proof equipment required for Egyptian workshop handling.
0
Ozone Depletion (ODP)
Zero ozone depletion potential — contains no chlorine. One of the main reasons R410A replaced R22 globally and became Egypt’s new installation standard.
2× Higher
Operating Pressure vs R22
R410A operates at 40–70% higher pressure than R22. This means R410A equipment — pipes, fittings, compressors, manifolds — cannot be substituted with R22-rated components.
Pink
Cylinder Colour Code
International standard cylinder colour for R410A is rose/pink. Always verify both the cylinder colour and label — never rely on colour alone. Counterfeits often use incorrect colour coding.
⚠️ Critical: R410A cannot be mixed with R22 under any circumstances. R410A operates at roughly double the system pressure of R22. Introducing R410A into an R22 system — even as a “top up” — will cause immediate over-pressurisation and catastrophic system failure. R22 systems that need refrigerant must use R22 (or a certified R22 retrofit such as R417A). R410A systems must use R410A only. This is the most dangerous refrigerant mixing mistake in Egypt’s HVAC market. If a customer or technician is unsure which gas a system uses, check the outdoor unit nameplate before opening any cylinder.
Why R410A Is Egypt’s Highest-Demand New-Installation Refrigerant Right Now
The Egyptian AC market tells a clear story in three phases. Before 2015, R22 dominated. From 2015 onwards, all new residential split AC systems shifted to R410A as manufacturers stopped producing R22-based models. From approximately 2022, R32 began appearing in premium inverter models — but R410A remains the dominant gas in the current installed base and in most ongoing new installations.
New Residential Construction
Every new apartment, villa and compound in Egypt — Cairo, New Capital, North Coast, Alexandria expansion zones — is being fitted with R410A split AC systems. Egypt’s construction sector is one of Africa’s most active. R410A demand from new residential installations alone is enormous and growing annually.
Commercial & Hotel Sector
Egypt’s commercial construction — hotels, malls, hospitals, offices, the New Administrative Capital’s government district — uses R410A in all medium and large split systems, cassette units and fan-coil applications. Commercial HVAC contractors are among the highest-volume R410A buyers in Egypt’s market.
Service & Maintenance Market
Every split AC system installed in Egypt from 2015–2025 will need R410A for annual service and top-up for the next 10–15 years. This service market — HVAC maintenance companies, individual technicians, building facility managers — represents a large, steady, recurring demand. Spare parts dealers who stock R410A serve this market directly.
Compatible Egyptian AC Brands
LG · Samsung · Carrier · Midea · Gree · Haier · Hisense · Daikin · Panasonic · Hitachi · Mitsubishi — every major AC brand sold in Egypt from 2015 onwards uses R410A. Egyptian importers stocking spare parts for any of these brands need R410A on every order.
R410A Brands Available — 5 Products for Every Egyptian Buyer
Al Faisal stocks 5 R410A products across 5 brands — UAE origin, Korean, French and other options covering every documentation requirement and price point.
Westron® R410A — UAE Origin ★
Al Faisal’s own brand — manufactured in the UAE. The flagship R410A product for Egyptian importers. Direct brand ownership means no intermediary between manufacture and export — verified purity, authentic labelling, UAE Certificate of Origin documentation, and Al Faisal’s own quality guarantee. The most popular R410A choice for Egyptian wholesale dealers who order regularly from Al Faisal.
Origin: UAE · Brand owner: Al Faisal
Maxron® R410A — Made in Korea
Korean-manufactured R410A distributed by Al Faisal. Korean industrial gas manufacturing is known for consistent purity and reliable cylinder filling standards. Maxron® R410A is ideal for Egyptian importers who want Korean manufacturing credentials at a competitive wholesale price — particularly popular with dealers supplying mid-range service workshops.
Origin: Korea · Distributed by: Al Faisal
Forane® R-410A — Arkema, France (11.3KG)
The premium European benchmark. Forane® by Arkema is the gas that major HVAC manufacturers — Carrier, Daikin, Mitsubishi, LG — use in their own factory testing and specify for warranty-compliant servicing. Available in 11.3KG cylinders. The choice for Egyptian importers supplying premium commercial HVAC contractors, OEM service centres and hotel engineering departments.
Origin: France (Arkema) · Size: 11.3KG
ELIWELL R-410A
ELIWELL R410A for Egyptian importers who need an internationally branded product at a mid-range price point. Covers both the wholesale importer and the HVAC spare parts retail market. A reliable option for dealers who stock multiple brands to serve different customer segments in the Egyptian market.
Brand: ELIWELL · Standard cylinder
Fastcool R410A
Competitively priced R410A for high-volume Egyptian importers focused on maximum quantity at the best price-per-kg. Good fit for dealers supplying residential maintenance teams and small HVAC contractors where cost per cylinder is the primary purchasing decision. Stocked by Al Faisal alongside the premium brands for complete market coverage.
Brand: Fastcool · Competitive pricing
R410A Technical Specifications
| Property | Value |
|---|---|
| Composition | 50% R-32 (Difluoromethane) + 50% R-125 (Pentafluoroethane) |
| Refrigerant type | HFC blend (Hydrofluorocarbon) |
| Boiling point | −51.5°C (−60.7°F) |
| Operating pressure vs R22 | 40–70% higher — dedicated R410A equipment required throughout |
| GWP (Global Warming Potential) | 2,088 — subject to Kigali Amendment phase-down |
| ODP (Ozone Depletion Potential) | 0 (zero) — contains no chlorine |
| Safety classification (ASHRAE) | A1 — non-toxic, non-flammable |
| Cylinder colour code | Rose / pink |
| Lubricant required | POE (polyolester) oil — never mineral oil |
| Charging method | Liquid phase charging only (cylinder inverted) — never charge as vapour |
| Applications in Egypt | All new split AC (residential & commercial) since ~2015, VRF systems, cassette units, fan-coil systems |
⚠️ R410A Must Always Be Charged as Liquid — Critical for Egyptian Technicians
Unlike R22 which can be charged either as liquid or vapour, R410A is a near-azeotropic blend and must always be charged as liquid — meaning the cylinder must be inverted during charging. Charging R410A as vapour causes the R-32 and R-125 components to separate and enter the system at different ratios, permanently altering the refrigerant mixture. The system will not cool correctly and the compressor will be damaged.
- Always invert the R410A cylinder when charging — liquid out, not vapour
- Use only R410A-rated manifold gauges and hoses — higher pressure rating required
- Never use R22 equipment (gauges, hoses, fittings) on an R410A system
- Always use POE oil — never mineral oil — with R410A compressors
- Evacuate to minimum 500 microns before charging any R410A system
R410A vs R32 — What Egyptian Importers Need to Know About the Transition
Many Egyptian HVAC dealers ask whether they should reduce R410A stock in anticipation of an R32 transition. The answer for Egypt’s market is clear: R410A will remain the dominant refrigerant in Egypt’s installed base for at least 10–15 more years, and R32 stocking should be built up alongside — not instead of — R410A.
R410A — Stock Heavily Now
Every split AC system installed in Egypt from 2015 to 2024 runs on R410A. That is approximately 8–10 years of new installations — a massive installed base that will need servicing for 10–15 years. New commercial installations are still primarily R410A. The phase-down under the Kigali Amendment affects new equipment production timelines — not the maintenance of existing systems.
Action: Build strong R410A stock. Demand is at peak now and stays high for years.
R32 — Start Stocking Now
R32 is the next standard — lower GWP (675 vs 2,088), higher energy efficiency, increasingly specified by Daikin, Midea, Gree and LG for their premium inverter lines. Egyptian dealers who start stocking R32 now are ahead of the curve. Demand is currently modest but growing rapidly as newer models enter Egypt’s replacement cycle from 2025 onwards.
Action: Add R32 to stock now. See R32 page →
💡 Al Faisal supplies both R410A and R32 — Egyptian importers can order both in a single consolidated sea freight shipment from Jebel Ali. Westron® and Maxron® brands cover both gas types. See the full refrigerant gas range for Egypt →
R410A Compatible AC Brands — Egypt’s Market
Every major AC brand sold in Egypt from 2015 onwards uses R410A as standard. Egyptian spare parts dealers and HVAC contractors who service any of the following brands need R410A as their primary refrigerant stock.
LG
Dual Inverter, Standard Split, Multi-Split — all post-2015 LG AC models use R410A
Samsung
Wind-Free, Windfree Elite, Triangle series — Samsung residential and commercial R410A
Carrier
Infinity, Performance, Comfort series — Carrier’s residential and commercial lines use R410A
Midea
Widely sold across Egypt — majority of Midea split AC range uses R410A
Gree
Versati, U-Crown, Lomo series — Gree’s Egypt market units use R410A
Haier
T3-rated models for Egypt — Haier residential and commercial lines use R410A
Hisense
Fast-growing brand in Egypt — Hi-Smart and standard split AC lines use R410A
Panasonic · Hitachi · Daikin
Premium Japanese brands in Egypt’s commercial and high-end residential market — all R410A
✅ Egyptian Technician’s Checklist — Correct R410A Charging Procedure
- Confirm the system nameplate shows R410A — never assume, always verify
- Use R410A-rated manifold gauges and hoses — R22 gauges are not rated for R410A pressures
- Evacuate to 500 microns minimum — R410A is especially sensitive to moisture contamination
- Invert the R410A cylinder — charge as liquid only, never vapour
- Charge to the manufacturer’s specified weight shown on the outdoor unit nameplate
- Confirm POE oil is in the system — never add mineral oil to an R410A compressor
- Check operating pressures after charging: high side approximately 24–28 bar, low side approximately 8–10 bar at 35°C ambient
- If replacing the compressor — use an R410A-rated T3 compressor from Al Faisal
Shipping R410A from Dubai to Egypt
🚢 Sea Freight — Jebel Ali
Jebel Ali to Alexandria or Port Said. Weekly departures, transit 7–10 days. R410A cylinders ship as Class 2.2 compressed gas — IMDG hazardous goods declaration prepared by Al Faisal as standard. Most cost-effective for all cylinder sizes.
✈️ Air Freight — Restricted
R410A cylinders are classified as IATA dangerous goods and cannot be shipped by commercial air freight as cargo. All wholesale R410A orders must be planned on sea freight schedules. Plan 7–10 days transit time from order confirmation to Alexandria or Port Said.
📄 Full Documentation
Commercial Invoice · Packing List · MSDS · Dangerous Goods Declaration · Certificate of Origin (Dubai Chamber) · Bill of Lading. All prepared by Al Faisal as standard. Certificate of Analysis available on request for Westron® brand.
📦 Consolidate Everything
Combine R410A with R22, R134a, R32, R404A cylinders alongside compressors, copper pipe and spare parts in one LCL sea freight shipment. Maximum cost efficiency per order.
🌍 Africa Export Desk — Egypt
Order R410A refrigerant wholesale for Egypt from Dubai
Westron® (UAE) · Maxron® (Korea) · Forane® Arkema (France) · ELIWELL · Fastcool — 5 brands, sea freight Jebel Ali to Alexandria & Port Said, full DG documentation included
Frequently Asked Questions — R410A Refrigerant for Egypt
Can R410A be used to top up an R22 system in Egypt?
Absolutely not. R410A and R22 are completely incompatible. R410A operates at approximately double the system pressure of R22 — introducing it into an R22 system causes immediate over-pressurisation and catastrophic equipment failure. This is one of the most dangerous mistakes in Egyptian HVAC workshops. R22 systems must use R22, or a certified R22 retrofit refrigerant such as R417A. If in doubt, check the outdoor unit nameplate which clearly states the refrigerant type and charge weight.
Why must R410A be charged as liquid and not vapour?
R410A is a blend of two different gases — R-32 and R-125 — at a 50/50 ratio. When R410A is drawn from a cylinder as vapour, the two components do not leave at the same rate (R-32 evaporates faster due to its lower boiling point). This causes the remaining gas in the cylinder and the gas entering the system to have different compositions from the specified 50/50 blend. The result is a system charged with an off-specification refrigerant mixture that will not perform correctly and will damage the compressor over time. Always invert the R410A cylinder so liquid flows out, not vapour.
What is the difference between Westron® R410A and Forane® R410A?
Both are genuine R410A refrigerant — the difference is manufacturing origin and documentation. Westron® is manufactured in the UAE under Al Faisal’s own brand — UAE Certificate of Origin, Al Faisal’s direct quality guarantee, competitive wholesale pricing. Forane® by Arkema is the French premium standard — 11.3KG cylinders manufactured in France to the highest purity specification, preferred by OEM service centres and commercial HVAC contractors who work with European brand specifications. Egyptian importers often stock both: Westron® for general wholesale volume and Forane® for premium commercial applications.
Will R410A be phased out in Egypt like R22?
R410A is subject to the Kigali Amendment’s HFC phase-down schedule due to its high GWP of 2,088. However, Egypt as an Article 5 developing country has a later phase-down schedule than developed countries. More importantly, the phase-down affects new equipment production — not the servicing of existing systems. Every R410A system installed in Egypt from 2015 to 2025 will need R410A for service and maintenance for the next 10–15 years. For new equipment, the transition will be to R32 and other low-GWP alternatives — but R410A demand in Egypt’s aftermarket will remain substantial well into the 2030s.
What compressors are compatible with R410A for Egyptian AC systems?
Only compressors specifically designed and rated for R410A must be used. R22-designed compressors cannot handle R410A’s higher operating pressures. Al Faisal supplies T3-rated R410A-compatible compressors from GMCC, Invotech and LG for Egyptian split AC applications. All units are verified T3-rated for ambient temperatures up to 52°C — critical for Egyptian conditions. See the AC Compressors Egypt page for the full compressor range.
What is the minimum order for R410A wholesale from Dubai to Egypt?
There is no fixed unit minimum. LCL sea freight becomes cost-effective from approximately 0.5 CBM. A typical Egyptian R410A wholesale order includes a mixed pallet of R410A cylinders alongside R22, R134a and other gas types. Contact us via WhatsApp (+971 55 874 7919) with your required brands, quantities and destination port for a current price list and freight cost estimate.
Related Products & Pages
- All R410A Products — 5 products: Westron®, Maxron®, Forane® Arkema, ELIWELL, Fastcool
- Westron® R410A — UAE-origin, Al Faisal own brand
- Maxron® R410A — Made in Korea
- Forane® R-410A 11.3KG — French Arkema premium
- ELIWELL R-410A
- Fastcool R410A
- Refrigerant Gas Egypt — All Types — R22 · R32 · R134a · R404A · R407C and more (P03 Pillar)
- R22 Refrigerant Egypt — for Egypt’s large pre-2015 AC installed base
- R32 Refrigerant Egypt — the next standard: stock now alongside R410A
- R134a Refrigerant Egypt — automotive AC and refrigerators
- AC Compressors Egypt — R410A-rated T3 compressors: GMCC, Invotech, LG
- POE Compressor Oil — mandatory lubricant for all R410A systems
- HVAC Tools — R410A-rated manifold gauges, vacuum pumps
- Westron® Brand — UAE-origin refrigerants owned by Al Faisal
- Maxron® Brand — Made in Korea refrigerants
- Forane® by Arkema — French premium refrigerant brand
- Wholesale & Bulk Supply — how to set up a wholesale account
Order R410A Refrigerant Wholesale for Egypt from Dubai
Five brands. UAE origin, Korean, French and international. Westron® · Maxron® · Forane® Arkema · ELIWELL · Fastcool. The standard refrigerant for all new Egyptian split AC since 2015 — and the highest-demand gas in Egypt’s current installed base. Weekly sea freight from Jebel Ali to Alexandria and Port Said with full IMDG hazmat documentation.
📞 +971 55 874 7919 · ☎ 04 2340 337 · Shop No S03B, Al Wasl Building, Deira – Al Rigga, Dubai, UAE